tripod gate

The tripod gate turnstile is a common channel device used in conjunction with access control. Access control may cause tailgating, making it impossible to conduct strict security management. The cooperation between access control and tripod gate turnstile can perfectly solve this problem. This article will introduce the classification and operation mechanism of tripod gate turnstile in detail.

Tripod gate turnstile is divided into electric and manual types. After reading the card, the main shaft of the electric tripod gate turnstile automatically rotates a small angle to prompt people entering and leaving to pass. After reading the card, the electromagnet is unlocked and the tripod gate turnstile is manually pushed to rotate. The manual tripod gate turnstile is cheaper and is used more frequently. After all, most people do not pay much attention to the difference between manual and electric. A red and green light with an arrow is generally set on the tripod gate turnstile. After reading the card, the green light is on and the person is released. For most tripod gate turnstiles, when passing through, the card reading is invalid before the previous person passes, which limits the speed of the tripod gate turnstile.

The tripod gate turnstile needs to provide 220V AC voltage, with built-in power conversion, and its internal electromagnet is generally powered by 24V DC. According to the common appearance, the tripod gate turnstile can be divided into bridge-type rounded tripod gate turnstile, bridge-type inclined tripod gate turnstile, bridge-type butterfly tripod gate turnstile, bridge-type arc tripod gate turnstile, bridge-type octagonal tripod gate turnstile, vertical tripod gate turnstile and double-column tripod gate turnstile. When the tripod gate turnstile inputs 220V AC power, it must be connected to the protective ground to prevent leakage of the equipment. If the tripod gate turnstile is used outdoors, a cement platform must be built under the tripod gate turnstile to pad the tripod gate turnstile to prevent water accumulation under the tripod gate turnstile and to prevent the tripod gate turnstile from being too humid inside, which will affect the service life of the electric control equipment.

Because the tripod gate turnstile has a direction, when configuring the access controller for the tripod gate turnstile, if you want to read the card in and out, you need to configure a double-door access controller, one access relay output controls the entry, and the other access relay output controls the exit. Sometimes the tripod gate turnstile is also used to control the one-way passage of personnel, that is, the main shaft can only rotate freely in one direction and cannot rotate in the opposite direction, and personnel can only pass in one direction, such as the entrance of a supermarket, which can only enter but not exit.

tripod gate turnstile

The above is an introduction to the classification and operation mechanism of the tripod gate turnstile. If you are interested in Shengyu's products or have any questions, you can contact us directly or leave a message. Shengyu will contact you in time after receiving your information. For more details, please consult the official website of Shanghai Shengyu Building Intelligent Technology Co., Ltd.