NGM enhanced hydraulic rising bollard product details

2016-09-12 00:00

Pressure rising bollard product description

1. NGM reinforced hydraulic rising bollard is made of advanced split-type movement. Waterproof reaches IP67. The motor contains thermal protection device.

2. The control system is a multi-functional integrated digital programming system independently developed by NGM. One controller can simultaneously control 1-6 rising bollards, and can also control 1.3.5 lift 2.4.6 without moving. Or 1.2. 3 lifting. 4.5.6 does not move. There are 3 working modes (this function belongs to industry *) controller.

3. Reserved with card reader opening and ground detection signal interface, can be compatible with any opening signal. The product operation and installation wiring is simple. Just a 5-core cable to the controller.

4. Center column diameter 219X6MM304 seamless stainless steel tube drawing

5. Pre-buried bottom box specifications: width 400X length 540X height 820MM

6. Control system box size: 640x420x150mm

rising bollard.jpg

NGM enhanced hydraulic rising bollard range of use:

Products are widely used in urban transportation and important national institutions and surrounding areas, pedestrian streets, highways, toll stations, airports, schools, banks, large clubs, parking lots and many other occasions. Through the restrictions on passing vehicles, the traffic order, that is, the safety of major facilities and places is effectively guaranteed.

1. Gates of important units such as state organs: install lifting and riot-proof roadblocks, and control the lifting by electric, remote control or credit card, effectively preventing the entry of external unit vehicles and illegal vehicles.

2. Pedestrian Street: Install a lifting roadblock at the intersection of the pedestrian street. The roadblock is in a rising state and restricts the entry and exit of the vehicle. In case of emergency or special circumstances (such as fire, first aid, leadership inspection, etc.), the roadblock can be quickly lowered to allow the vehicle to pass.

3. Road isolation belt: In the non-fully enclosed road isolation belt, a lifting road barrier can be used, which usually prevents the vehicle from turning left or turning around. In case of special conditions such as road construction and road blockage, roadblocks can be lowered to allow vehicles to be diverted.

4. Multi-purpose plaza: During the daytime, roadblocks rise, vehicles are prohibited from entering the plaza, and the plaza is used as a temporary parking lot at night, and the roadblocks are put down, and the vehicles can enter the parking.

5. Open parks: Elevated roadblocks are installed at open park intersections. Usually, roadblocks rise to prevent vehicles from passing, and visitors can pass freely. In case of special circumstances, lower the lift barrier to allow the vehicle to pass.

6, the community, banks, schools and other places that restrict the entry of vehicles and ensure the effective use of fire exits.

7. Expressway: It is necessary to urgently close the road and use the automatic lifting road pile, which is convenient and quick, and can solve the pressure of insufficient police force.